How to build a portable laundry unit
- by admin
The easiest way to make a portable washing machine is to buy a used washing machine and put a cord around the top.
This article will show you how to build one using a few materials you already have in your home.
You’ll also learn how to attach the washing machine to a wall.
If you want to buy one of these, make sure to read the “how-to” section below for more detailed instructions.
Step 1: Find a used laundry machine.
You can buy a cheap one on eBay for about $15, or you can go to an actual used laundry store.
You could also find a used one at your local hardware store or thrift store, but this article will focus on buying a used model.
You want a model that’s at least 6 inches (15 centimeters) tall, with a capacity of 10 cubic feet (2,800 cubic centimeters).
The best models will have an interior that is at least 3 inches (7 centimeters) thick and at least 1.5 inches (3 centimeters) deep.
You should also make sure the unit is at the right size for your room.
It may be easier to build this unit on the lowest shelf you have available in your room than it is on the higher shelves.
Step 2: Buy a cord.
You don’t need a fancy cord.
Just buy one that’s shorter than your washing machine’s cord.
It should have a loop for the cord, and the ends should be attached to the unit with a sturdy hook.
For this tutorial, I’m going to use a cord that’s about 6 inches long, but you can also buy a smaller cord.
This will give you enough room to attach your washing device to your wall and keep the unit in place.
For the purpose of this tutorial I’m using the cord I bought on Amazon.
It’s a white, 6-inch-long, 1-inch wide cord that I bought for $1.99.
Step 3: Attach the washing device.
This is really easy, but I like to tie a small loop on the end of the cord to the end you attach to the wall.
Make sure the loop is long enough to wrap around your device and keep it from twisting.
You also want to make sure that the loop isn’t too short to clip the device to the shelf.
This way you can easily attach the device, without it turning around while you’re using it.
I used a couple of staples to attach a long piece of cord to my washing machine.
I also tied a small piece of tape to the ends of the device.
Step 4: Make the unit.
This step is a bit tricky, but it’s the easiest part.
You need to cut a piece of wire, about 4 inches (10 centimeters) long.
Tie the end to the cord and make a loop.
You will then need to wrap a piece or two of cord around your unit.
Step 5: Attached the unit to the walls.
Make a hole at the top of the unit and attach a hook to the front of the hook.
This works well if you want a small hole on your wall, or if you don’t want the unit hanging above the wall when you’re washing.
I just cut a hole in the unit’s bottom to make room for my washing device and attached it to my wall.
You may also want a piece that will allow you to pull the unit off the wall and hook it up again later.
Step 6: Attaching the washing unit to a rack.
This part is the hardest part.
Start by cutting the hole in your unit’s top, which is about 2 inches (5 centimeters) wide.
Cut the ends off of a piece you already cut.
You now have a 3-inch (8 centimeters) by 3-in (9 centimeters) hole that you can attach your unit to your rack.
I attached my unit to my rack using a 3×2-inch x 2-in-4-cm (1-by-1) plastic plate.
It will need to be slightly larger than the hole you made in the top, so make sure it’s large enough.
I made mine 3 inches by 3 inches, and it worked great.
Step 7: Attachment the unit back to your washing unit.
You’ve now attached your unit back into your wall.
Now you can hang the unit on your ceiling or attach it to your shower wall.
This process is the most time-consuming part, but the most convenient part.
To attach the unit, simply loop the end around the bottom of the machine and attach the hook to a small hook attached to your clothes hook.
If your clothes are long enough, you should be able to attach them using staples.
To hang your clothes, hook the clothes hook through the bottom and attach it with a 2-inch long, 4-inch by 4-in by 4.5-inch string attached to a metal hook on your belt.
You might also want something to hang from your clothes that will attach to your hook.
The easiest way to make a portable washing machine is to buy a used washing machine and put a cord…